dnp standard color viewer
the dnp standard color viewer is a light source whichenablesyou to evaluate and adjust video and still cameras. withitshigh-frequency fluorescent lighting method, it handlesimageswithout flicker.
specification
light source: dnp standard color viewer lamp
(four 10w dedicated fluorescent tubes are used)
power supply: ac100v 50, 60hz
lighting method: high frequency lighting method 20khz
color rendering: over 90% rendering evaluation-point for each color
color temperature: (measured by minolta cl-200)
operating temperature: 10～40℃
operating humidity: below 80%(avoid dew)
major diameter dimension: 375w×365h×165d m/m
luminance plane dimension: 250w×190h m/m
color chart dimension: 320w×290h m/m
power consumption: 80w
weight: 6.5kg/7.5kg
ccv-31f
ccv-51f
ccv-31f/g
ccv-51f/g
●the luminance plane characteristics: according to thetypesof self-contained fluorescent lamp
product type luminance color temperature lamp color temperature luminance color matching shift weight
ccv-31f fixed fl10ww-dlb 3100k±300 over 1300cd/m2 within 10% 6.5kg
ccv-51f fixed fl10d-edl-56k 5100k±300 over 1400cd/m2 within 10% 6.5kg
ccv-31f/g volume adjustable fl-10ww-dlb 3100k±300 over 850～1300cd/m2 within 10% 7.5kg
ccv-51f/g volume adjustable fl10d-edl-56k 5100k±300 over 850～1400cd/m2 within 10% 7.5kg
＊thecolortemperature if luminance. color temperature conversion typeviewerranges over 50k according to the change of theluminance.
＊the specification may change without notice
operation manual
【1】 before usingtheproduct:
power supply ac 100v, 50/60hz shared
light source 10w dnp standard color viewer lamp (4)
power consumption 80w
【2】 using thednpstandard color viewer
(1) plug the power cable of the product into ac100v
【precautions】 do notconnectany power supply other than ac100v
if the other power supply connected by accident, the inverterinsidewill burned out
(2) turn on the power switch
(3) lamp lights: the lamp light will stabilised after 15 to20minutes at the room temperature(20℃)
(4) if the lamp does not lit, call for service office fortheconfirmation as described on other documents.
(5) to suspend snaking of the lamp, press power switch 3 to 4times[as on/off].
【3】 if the lightdoesnot lit
call for service office to confirmthefollowing:
(1) ac 100v supplied to the wall socket.
(2) plug the product into the wall socket.
(3) turn the power supply switch of the product on
still the lamp does not lit: considerthefollowing:
(1) two of the viewer lamps lit simultaneously, one of the fusesofthe inverters has blowouts.
(2) four of the viewer lamps does not light means that each ofthefuses of the two inverters has blowouts.
【precautions】 the aboveoccursif the applied power supply is not ac 100v.
fuse bum out cause internal burnout of inverter. the burnedinverterneeds to replace.
【4】 how to replacethelamp and keep it clean
place the viewer on the flat table, and plug outthepower supply cable from the wall socket.
remove the used device in the following order:
(1) unfasten the two of grub screws on the top frame.
(2) to remove the top frame from the main unit;
holding 50 to 60 mm the grub screw of the top frame and pressitforward.
(3) remove the glass plate and acrylic plate.
【precaution】 glassplateeasily breaks and may hurt your hands and fingers.
handle the edge of the plate with care not to scratch.
◆replacing the lamps:
(1) when the lamps used over 2,000 hours or one year, it needstoreplace.
(2) remove the lamp tubes: hold the edge of the lamp tubes, andturnit 90 degree.
◆cleaning the device:
(1) impregnate alcohol to gauze then apply it onto the surfaceofthe reflection plate / acrylic plate / glass surface to removethedirt.
(2) clean the device once in six months to one year to keepqualityof the color temperature and luminance.
【5】 otherprecautions
handling the viewer needs the followingprecautionsbecause it contains the parts using glass.
(1) do not add strong impact on the viewer
(2) do not put any heavy items on the surface of the viewer
dnp standard color viewer for hdtv
the dnp standard color viewer for hdtv is a lightsourcewhich enables you to evaluate and adjust video and stillcameras.with its high-frequency fluorescent lighting method, ithandlesimages without flicker.
specification
light source: dnp standard color viewer lamp
(four 15w dedicated fluorescent tubes are used)
power supply: ac100v 50、60hz
lighting method: high frequency lighting method 20khz
color rendering: over 90% rendering evaluation-point for each color
color temperature: (measured by minolta cl-200)
operating temperature: 10～40℃
operating humidity: below 80%(avoid dew)
major diameter dimension: 490w×380h×150d m/m
luminance plane dimension: 272w×153h m/m
color chart dimension: 310w×200h m/m
power consumption: 110w
weight: 10kg
hdf-51f
the characteristics according to the viewerluminanceplane
product type lamp color temperature luminance color matching shift
hdf-51f fl15d-edl-56k 5100k±300 over 3500cd/m2 within 5%
＊thespecification may changewithout notice
operation manual
【1】 before usingtheproduct:
power supply ac 100v, 50/60hz shared
light source 15w dnp standard color viewer lamp (4)
power consumption 110w
【2】 using thednpstandard color viewer for hdtv
(1) plug the power cable of the product into ac100v
【precautions】 do notconnectany power supply other than ac100v
if the other power supply connected by accident, the inverterinsidewill burned out
(2) turn on the power switch
(3) lamp lights: the lamp light will stabilised after 15 to20minutes at the room temperature(20℃)
(4) if the lamp does not lit, call for service office fortheconfirmation as described on other documents.
(5) to suspend snaking of the lamp, press power switch 3 to 4times[as on/off].
【3】 if the lightdoesnot lit
call for service office to confirmthefollowing:
(1) ac 100v supplied to the wall socket.
(2) plug the product into the wall socket.
(3) turn the power supply switch of the product on
still the lamp does not lit: considerthefollowing:
(1) two of the viewer lamps lit simultaneously, one of the fusesofthe inverters has blowouts.
(2) four of the viewer lamps does not light means that each ofthefuses of the two inverters has blowouts.
【precautions】 the aboveoccursif the applied power supply is not ac 100v.
fuse bum out cause internal burnout of inverter. the burnedinverterneeds to replace.
【4】 how to replacethelamp and keep it clean
place the viewer on the flat table, and plug outthepower supply cable from the wall socket.
remove the used device in the following order:
(1) unfasten the four of grub screws on the top frame.
(2) pull up the upper frame.
(3) remove he glass plate and acrylic plate.
【precautions】 glassplateeasily breaks and may hurt your hands and fingers.
handle the edge of the plate with care not to scratch.
◆replacing the lamps:
(1) when the lamps used over 2,000 hours or one year, it needstoreplace.
(2) the socket of the lamp has a spring inside, press ittowardone-way.
◆cleaning the device:
(1) impregnate alcohol to gauze then apply it onto the surfaceofthe reflection plate / acrylic plate / glass surface to removethedirt.
(2) clean the device once in six months to one year to keepqualityof the color temperature and luminance.
【5】 otherprecautions
handling the viewer needs the followingprecautionsbecause it contains the parts using glass.
(1) do not add strong impact on the viewer
(2) do not put any heavy items on the surface of the viewer

---

东莞众和仪器电子设备商行
黄强
18925463172
塘厦林村